Strong Panel - ProfileVent® Panel Fit
Item No. 1560911
Description
Strong Panel - ProfileVent® Panel Fit
- Limited lifetime warranty
- Design passes Dade Count 110 mph wind-driven rain test
- Reduces utility bills through added attic ventilation
- Prevents moisture, pests and dust from entering the structure
- Fits any ridge cap
- Custom cut profiles to fit most panels
- One person installation
- Glue spots prevent slipping during installation
- Will not sustain a flame – class A fire rating
- No fiber debris in packages
- Fits any pitch 2:12 – 20:12
- Meets all model building codes
- Ridge vent ventilation material
- New or re-roof on purlin or wood deck construction
- Anchor clips are recommended in high wind areas and on panels with major ribs 16" on center or greater
Installation–Panel Fit
Use a 2" opening at the ridge to provide ventilation. On new or re-roof wood deck construction, cut a 2" slot at the ridge (1" each side, start cut 6" from gable ends). On purlin construction position panels to leave a 2" opening
Step 1 Allow 2" opening at ridge for ventilation. ProfileVent® is positioned along the ridge, gable to gable, about 1/2" to 1" up-slope from the ridge cap edge. The positioning adhesive on most profiles will hold ProfileVent® in position and allow for repositioning.
Step 2 ProfileVent® can be cut with scissors or utility knife. When splicing ProfileVent®, make the splice at the center top of the high rib and use caulk or sealant along the splice
Step 3 Screw through ridge cap and top of each anchor clip (if applicable). Blind rivets can be used to anchor the ridge cap when using architectural or standing seam panels.