#14 Type A Metal Self-tapping Screw, HH | TA-14

• Zinc plated carbon steel
• Available with no sealing washer or with bond seal washer
• Long lengths available for specialty applications

Metal panel to light and medium gauge metal application

• Install fasteners with 0–1000 rpm screw gun equipped with depth sensing nose piece.
• Use of impact guns or hammer drill is not recommended
• Metal thickness/drill bit size:
• 0.021"–0.026" (0.53 mm–0.66 mm);  drill bit size 1/8" (3.18 mm)
• 0.027"–0.050" (0.69 mm–1.27 mm);  drill bit size 3/16" (4.75 mm)
• 0.051"–0.075" (1.29 mm–1.9 mm);  drill bit size #8 (5.05 mm)
• The hole size determine installations performance and pull out strength. Thickness is based on normal, single thickness purlin/girt or multiple material thickness combined for total.
• Fastener length should provide for a minimum of 3/16" penetration of fully developed threads into metal substrate.