#10 Woodgrip™ HiLo Metal to Wood Screw, HWH | WGHLMP-10
#10 Woodgrip™ HiLo Metal to Wood Screw, HWH
Product Type
Wood screw
Material
Carbon steel
Diameter
#10
Diameter [mm]
4.95 mm
Threads Per Inch
15
Head Style
Hex Washer head
Drive Socket
1/4" Hex
Washer
1/2" Galvanized bond seal
Drill Point
Type 17 milled point
Drill Capacity Max [Inches]
24 ga.
Drill Capacity Range [mm]
0.6 mm
Thread Major Dia
0.195"
Thread Major Dia [mm]
4.95 mm
Thread Minor Dia
0.130"
Thread Minor Dia [mm]
3.3 mm
Metal panel to wood
- High hex washer head provides driving stability
- Type 17 milled point for fast installation
- Assembled bond seal washer
- VistaCoat® premium coating system
- VistaCoat® limited warranty
- Install fasteners with 0–2500 rpm screw gun equipped with depth sensing nose piece.
- Special care needs to be taken when installing into wood substrate less than 1" in thickness. Stripping or partially stripping the fastener out during installation compromises the clamp load and can affect the performance of the fastener.
- Use of impact guns or hammer drills is not recommended.
#10 Woodgrip™ HiLo Metal to Wood Screw, HWH | WGHLMP-10
#10 Woodgrip™ HiLo Metal to Wood Screw, HWH
Product Type
Wood screw
Material
Carbon steel
Diameter
#10
Diameter [mm]
4.95 mm
Threads Per Inch
15
Head Style
Hex Washer head
Drive Socket
1/4" Hex
Washer
1/2" Galvanized bond seal
Drill Point
Type 17 milled point
Drill Capacity Max [Inches]
24 ga.
Drill Capacity Range [mm]
0.6 mm
Thread Major Dia
0.195"
Thread Major Dia [mm]
4.95 mm
Thread Minor Dia
0.130"
Thread Minor Dia [mm]
3.3 mm
Metal panel to wood
- High hex washer head provides driving stability
- Type 17 milled point for fast installation
- Assembled bond seal washer
- VistaCoat® premium coating system
- VistaCoat® limited warranty
- Install fasteners with 0–2500 rpm screw gun equipped with depth sensing nose piece.
- Special care needs to be taken when installing into wood substrate less than 1" in thickness. Stripping or partially stripping the fastener out during installation compromises the clamp load and can affect the performance of the fastener.
- Use of impact guns or hammer drills is not recommended.