#14 TAMP Type 17 A-Milled Point Metal to Wood Screw, HWH | TAMP-14
#14 TAMP Type 17 A-Milled Point Metal to Wood Screw, HWH
Product Type
Self-tapping screw
Material
Carbon steel
Diameter
#14
Diameter [mm]
6.38 mm
Threads Per Inch
10
Head Style
Hex Washer head
Drive Socket
5/16" Hex
Washer
19/32" Galvanized bond seal
Drill Point
Type 17 A-milled point
Drill Capacity Max [Inches]
0.030" sheet
Drill Capacity Range [mm]
0.76 mm sheet
Thread Major Dia
0.251"
Thread Major Dia [mm]
6.4 mm
Thread Minor Dia
0.182"
Thread Minor Dia [mm]
4.6 mm
Metal panel to wood
- Sharp Type 17 A-milled point for fast installation
- Assembed bond seal washer
- VistaCoat® premium coating system
- VistaCoat® limited warranty
- Install fasteners with 0–2500 rpm screw gun equipped with depth sensing nose piece.
- Special care needs to be taken when installing into wood substrate less than 1" in thickness. Stripping or partially stripping the fastener out during installation compromises the clamp load and can affect the performance of the fastener.
- Use of impact guns or hammer drills is not recommended.
#14 TAMP Type 17 A-Milled Point Metal to Wood Screw, HWH | TAMP-14
#14 TAMP Type 17 A-Milled Point Metal to Wood Screw, HWH
Product Type
Self-tapping screw
Material
Carbon steel
Diameter
#14
Diameter [mm]
6.38 mm
Threads Per Inch
10
Head Style
Hex Washer head
Drive Socket
5/16" Hex
Washer
19/32" Galvanized bond seal
Drill Point
Type 17 A-milled point
Drill Capacity Max [Inches]
0.030" sheet
Drill Capacity Range [mm]
0.76 mm sheet
Thread Major Dia
0.251"
Thread Major Dia [mm]
6.4 mm
Thread Minor Dia
0.182"
Thread Minor Dia [mm]
4.6 mm
Metal panel to wood
- Sharp Type 17 A-milled point for fast installation
- Assembed bond seal washer
- VistaCoat® premium coating system
- VistaCoat® limited warranty
- Install fasteners with 0–2500 rpm screw gun equipped with depth sensing nose piece.
- Special care needs to be taken when installing into wood substrate less than 1" in thickness. Stripping or partially stripping the fastener out during installation compromises the clamp load and can affect the performance of the fastener.
- Use of impact guns or hammer drills is not recommended.