Top of the page

#10 Impax™ SD3 Utility Metal Self-Drill Screw, HWH | SDU-10

Fastener Length [Inches]
1"
1-1/2"
3/4"
Washer
1/2" Galvanized bond seal
No washer
#10 Impax™ SD3 Utility Metal Self-Drill Screw, HWH
Drive Socket
5/16" Hex
Loading Bearing Length [Inches]
0.31", 0.56", 1.06"
Loading Bearing Length [mm]
8, 14, 27
Product Type
Self-drilling screw
Diameter
#10
Diameter [mm]
4.72 mm
Drill Capacity Max [Inches]
0.176"
Drill Capacity Range [mm]
0.889 mm–4.47 mm
Drill Point
SD3
Head Style
Hex Washer head
Material
Carbon steel
Thread Major Dia
0.186"
Thread Major Dia [mm]
4.72 mm
Thread Minor Dia
0.138"
Thread Minor Dia [mm]
3.51 mm
Threads Per Inch
16
Washer
1/2" Galvanized bond seal, No washer

Metal panel to light gauge metal application

  • Precision cold forged point assuring superior strength and the fastest drilling time performance
  • Designed to have low driving and thread engagement torque and provide maximum clamp load
  • Available with no sealing washer or with bond seal washer
  • VistaCoat® premium coating system
  • VistaCoat® limited warranty

#10 Impax Utility data sheet

Product overview document
  •  Install fasteners with 0–2000 rpm screw gun equipped with depth sensing nose piece.
  • Fastener length should provide for a minimum of 3/16" penetration of fully developed threads into metal substrate.
  • Use of impact guns or hammer drills is not recommended.

 

 

#10 Impax™ SD3 Utility Metal Self-Drill Screw, HWH | SDU-10

Fastener Length [Inches]
1"
1-1/2"
3/4"
Washer
1/2" Galvanized bond seal
No washer
#10 Impax™ SD3 Utility Metal Self-Drill Screw, HWH
Drive Socket
5/16" Hex
Loading Bearing Length [Inches]
0.31", 0.56", 1.06"
Loading Bearing Length [mm]
8, 14, 27
Product Type
Self-drilling screw
Diameter
#10
Diameter [mm]
4.72 mm
Drill Capacity Max [Inches]
0.176"
Drill Capacity Range [mm]
0.889 mm–4.47 mm
Drill Point
SD3
Head Style
Hex Washer head
Material
Carbon steel
Thread Major Dia
0.186"
Thread Major Dia [mm]
4.72 mm
Thread Minor Dia
0.138"
Thread Minor Dia [mm]
3.51 mm
Threads Per Inch
16
Washer
1/2" Galvanized bond seal, No washer

Metal panel to light gauge metal application

  • Precision cold forged point assuring superior strength and the fastest drilling time performance
  • Designed to have low driving and thread engagement torque and provide maximum clamp load
  • Available with no sealing washer or with bond seal washer
  • VistaCoat® premium coating system
  • VistaCoat® limited warranty

#10 Impax Utility data sheet

Product overview document
  •  Install fasteners with 0–2000 rpm screw gun equipped with depth sensing nose piece.
  • Fastener length should provide for a minimum of 3/16" penetration of fully developed threads into metal substrate.
  • Use of impact guns or hammer drills is not recommended.