Top of the page

#12 Impax™ SD4.5 Metal Self-Drill Screw, HWH | SD45-12

Fastener Length [Inches]
1-1/4"
Washer
19/32" Galvanized bond seal
No washer
Colored Fastener
No
Yes
#12 Impax™ SD4.5 Metal Self-Drill Screw, HWH
Drive Socket
5/16" Hex
Loading Bearing Length [Inches]
0.53"
Loading Bearing Length [mm]
13
Product Type
Self-drilling screw
Diameter
#12
Diameter [mm]
5.4 mm
Drill Capacity Max [Inches]
0.375"
Drill Capacity Range [mm]
1.91 mm–9.53 mm
Drill Point
SD4.5
Head Style
Hex Washer head
Material
Carbon steel
Thread Major Dia
0.212"
Thread Major Dia [mm]
5.4 mm
Thread Minor Dia
0.184"
Thread Minor Dia [mm]
4.7 mm
Threads Per Inch
24
Washer
19/32" Galvanized bond seal, No washer

Metal panel to medium and heavy gauge metal application

  • Precision cold forged point assuring superior strength and the fastest drilling time performance
  • Designed to have low driving and thread engagement torque and provide maximum clamp load
  • Available with no sealing washer or with bond seal washer
  • VistaCoat® premium coating system
  • VistaCoat® limited warranty

#12-24 Impax SD4.5 data sheet

Product overview document
  • Tools; 0–2000 rpm screw gun equipped with depth sensing nose piece.
  • Fastener length should provide for a minimum of 3/16" penetration of fully developed threads into metal substrate.
  • Use of impact guns or hammer drills is not recommended.

 

 

#12 Impax™ SD4.5 Metal Self-Drill Screw, HWH | SD45-12

Fastener Length [Inches]
1-1/4"
Washer
19/32" Galvanized bond seal
No washer
Colored Fastener
No
Yes
#12 Impax™ SD4.5 Metal Self-Drill Screw, HWH
Drive Socket
5/16" Hex
Loading Bearing Length [Inches]
0.53"
Loading Bearing Length [mm]
13
Product Type
Self-drilling screw
Diameter
#12
Diameter [mm]
5.4 mm
Drill Capacity Max [Inches]
0.375"
Drill Capacity Range [mm]
1.91 mm–9.53 mm
Drill Point
SD4.5
Head Style
Hex Washer head
Material
Carbon steel
Thread Major Dia
0.212"
Thread Major Dia [mm]
5.4 mm
Thread Minor Dia
0.184"
Thread Minor Dia [mm]
4.7 mm
Threads Per Inch
24
Washer
19/32" Galvanized bond seal, No washer

Metal panel to medium and heavy gauge metal application

  • Precision cold forged point assuring superior strength and the fastest drilling time performance
  • Designed to have low driving and thread engagement torque and provide maximum clamp load
  • Available with no sealing washer or with bond seal washer
  • VistaCoat® premium coating system
  • VistaCoat® limited warranty

#12-24 Impax SD4.5 data sheet

Product overview document
  • Tools; 0–2000 rpm screw gun equipped with depth sensing nose piece.
  • Fastener length should provide for a minimum of 3/16" penetration of fully developed threads into metal substrate.
  • Use of impact guns or hammer drills is not recommended.