#15 Dekfast™ Self-Drill Screw, Phillips #3, Truss Head | DF-15-PH3
Fastener Length [Inches]
10"
12"
14"
16"
2"
3"
4"
5"
6"
7"
8"
9"
#15 Dekfast™ Self-Drill Screw, Phillips #3, Truss Head
Drive Socket
#3 Phillips
Product Type
Self-drilling screw
Diameter
#15
Head Style
Truss head
Material
Carbon steel
Thread Major Dia
0.260"
Thread Major Dia [mm]
6.6 mm
Thread Minor Dia
0.170"
Thread Minor Dia [mm]
4.32 mm
Threads Per Inch
13
Washer
No washer
Insulation and membrane attachment to steel, wood and structural concrete decks
- Extra stable #3 Phillips drive Drill point design prevents fastener walking 13 threads per inch provides higher pull-out values Drill point cuts through gravel and BUR Cathodic epoxy e-coat
Install fasteners with 2000–2500 rpm screw guns with hardened #3 Phillips bit. For structural concrete, 7/32" carbide bit and 1500 rpm screw gun or hammer drill in hammer mode. Structural concrete to be predrilled with standard 7/32" carbide bit to minimum 1/2" deeper than fastener penetration. The standard carton package includes one #3 Phillips bit.
Material:
- Steel thickness from 26 ga (0.019 in.) through 18 ga (0.048 in.); Min penetration 3/4"
- Wood 2x (1-1/2" thick); Min penetration 1"
- Plywood and OSB; Min through penetration 3/4"
- Structural concrete; Min penetration 1"
#15 Dekfast™ Self-Drill Screw, Phillips #3, Truss Head | DF-15-PH3
Fastener Length [Inches]
10"
12"
14"
16"
2"
3"
4"
5"
6"
7"
8"
9"
#15 Dekfast™ Self-Drill Screw, Phillips #3, Truss Head
Drive Socket
#3 Phillips
Product Type
Self-drilling screw
Diameter
#15
Head Style
Truss head
Material
Carbon steel
Thread Major Dia
0.260"
Thread Major Dia [mm]
6.6 mm
Thread Minor Dia
0.170"
Thread Minor Dia [mm]
4.32 mm
Threads Per Inch
13
Washer
No washer
Insulation and membrane attachment to steel, wood and structural concrete decks
- Extra stable #3 Phillips drive Drill point design prevents fastener walking 13 threads per inch provides higher pull-out values Drill point cuts through gravel and BUR Cathodic epoxy e-coat
Install fasteners with 2000–2500 rpm screw guns with hardened #3 Phillips bit. For structural concrete, 7/32" carbide bit and 1500 rpm screw gun or hammer drill in hammer mode. Structural concrete to be predrilled with standard 7/32" carbide bit to minimum 1/2" deeper than fastener penetration. The standard carton package includes one #3 Phillips bit.
Material:
- Steel thickness from 26 ga (0.019 in.) through 18 ga (0.048 in.); Min penetration 3/4"
- Wood 2x (1-1/2" thick); Min penetration 1"
- Plywood and OSB; Min through penetration 3/4"
- Structural concrete; Min penetration 1"