#10 WoodMAC™ HiLo Metal to Wood Screw, Stainless Capped HWH | MW-10
Fastener Length [Inches]
1"
1-1/2"
2"
2-1/2"
Colored Fastener
No
Yes
#10 WoodMAC™ HiLo Metal to Wood Screw, Stainless Capped HWH
Drive Socket
1/4" Hex
Product Type
Wood screw
Diameter
#10
Diameter [mm]
4.95 mm
Drill Capacity Max [Inches]
24 ga.
Drill Capacity Range [mm]
0.6 mm
Drill Point
Type 17 milled point
Head Cap
MAC Stainless capped
Head Style
Hex Washer head
Material
Carbon steel
Thread Major Dia
0.195"
Thread Major Dia [mm]
4.95 mm
Thread Minor Dia
0.130"
Thread Minor Dia [mm]
3.3 mm
Threads Per Inch
15
Washer
Cut Washer EPDM
Metal panel to wood
- 304 stainless steel capped hex washer head that will never red rust
- High hex washer head provides driving stability
- Type 17 milled point for fast installation
- Assembled EPDM sealing washer
- Long life fastener limited warranty
- Install fasteners with 0–2500 rpm screw gun equipped with depth sensing nose piece.
- Special care needs to be taken when installing into wood substrate less than 1" in thickness. Stripping or partially stripping the fastener out during installation compromises the clamp load and can affect the performance of the fastener.
- Use of impact guns or hammer drills is not recommended.
#10 WoodMAC™ HiLo Metal to Wood Screw, Stainless Capped HWH | MW-10
Fastener Length [Inches]
1"
1-1/2"
2"
2-1/2"
Colored Fastener
No
Yes
#10 WoodMAC™ HiLo Metal to Wood Screw, Stainless Capped HWH
Drive Socket
1/4" Hex
Product Type
Wood screw
Diameter
#10
Diameter [mm]
4.95 mm
Drill Capacity Max [Inches]
24 ga.
Drill Capacity Range [mm]
0.6 mm
Drill Point
Type 17 milled point
Head Cap
MAC Stainless capped
Head Style
Hex Washer head
Material
Carbon steel
Thread Major Dia
0.195"
Thread Major Dia [mm]
4.95 mm
Thread Minor Dia
0.130"
Thread Minor Dia [mm]
3.3 mm
Threads Per Inch
15
Washer
Cut Washer EPDM
Metal panel to wood
- 304 stainless steel capped hex washer head that will never red rust
- High hex washer head provides driving stability
- Type 17 milled point for fast installation
- Assembled EPDM sealing washer
- Long life fastener limited warranty
- Install fasteners with 0–2500 rpm screw gun equipped with depth sensing nose piece.
- Special care needs to be taken when installing into wood substrate less than 1" in thickness. Stripping or partially stripping the fastener out during installation compromises the clamp load and can affect the performance of the fastener.
- Use of impact guns or hammer drills is not recommended.