#12 Impax™ SD3 Metal Self-Drill Screw, HWH | SD3-12
#12-14 Impax SD3 Metal to Metal Fastener
Fastener Length [Inches]
Color Code
US0001
US0012
US0014
US0020
US0023
US0042
US0051
US0052
US0074
US0091
US0102
US0109
US0110
US0228
US0230
US0232
US0248
US0302
US0324
US0330
US0348
US0374
US385
US0393
US0415
US0416
US0422
US0507
US0537
US0548
US0576
US0578
US0660
US0691
US0696
US0732
US0798
US0818
US0843
US0850
US0890
US0928
US1116
Colored Fastener
Washer
Item No. 1302885
#12 Impax™ SD3 Metal Self-Drill Screw, HWH Precision cold forged point assuring superior strength and the fastest drilling time performance Designed to have low driving and thread engagement torque and provide maximum clamp load Fasteners 1" and longer have special long pilot lengths to
Read full description
Description
Description
#12 Impax™ SD3 Metal Self-Drill Screw, HWH
- Precision cold forged point assuring superior strength and the fastest drilling time performance
- Designed to have low driving and thread engagement torque and provide maximum clamp load
- Fasteners 1" and longer have special long pilot lengths to accommodate nested purlins
- Available with no sealing washer or with bond seal washer
- VistaCoat® premium coating system
- VistaCoat® limited warranty
Metal panel to light and medium gauge metal application
- Install fasteners with 0–2000 rpm screw gun equipped with depth sensing nose piece.
- Fastener length should provide for a minimum of 3/16" penetration of fully developed threads into metal substrate.
- Use of impact guns or hammer drills is not recommended.
8f46861b-1dd6-45da-b6e3-25e379c52d67
20cb30f3-2a01-49ac-a1a7-25f2ecb033bb
79752693-cdbe-4e3b-bfee-b4c3b0d953f4
Product overview document
#12 Impax SD3 data sheet
Standard Colors
Specifications
Specifications
Drive Socket
5/16" Hex
Loading Bearing Length [Inches]
0.26"|0.35"|0.60"|0.85"|1.35"|1.85"|2.35"|3.35"
Loading Bearing Length [mm]
7|9|15|22|34|47|60|85
Product Type
Self-drilling screw
Diameter
#12
Diameter [mm]
5.38 mm
Drill Capacity Max [Inches]
0.210"
Drill Capacity Range [mm]
0.889 mm–5.334 mm
Drill Point
SD3
Head Style
Hex Washer head
Material
Carbon steel
Thread Major Dia
0.212"
Thread Major Dia [mm]
5.38 mm
Thread Minor Dia
0.160"
Thread Minor Dia [mm]
4.06 mm
Threads Per Inch
14
Washer
19/32" Galvanized bond seal|No washer
Attachments
Attachments