Deutsch (Deutschland)
eesti (Eesti)
suomi (Suomi)
français (France)
English (United Kingdom)
italiano (Italia)
Flex5 selectively hardened fasteners with Grade 5 performance
Trust these versatile fasteners to deliver fast installation and uncompromising strength.
Flex5 product are listed on Intertek CCRR-0347 Report
Flex5 self-drilling fasteners are made from alloy steel and are manufactured with a selective hardness heat treat process to give the load bearing part of the fastener Grade 5 specification performance (RC28-34), with a higher hardness for the drill point and lead-in thread (min. RC52) for drilling and tapping into steel. The lower hardness of the load bearing area increases the fastener's ductility helping to prevent hydrogen embrittlement.
Flex5 self-drilling fasteners are made from alloy steel and are manufactured with a selective hardness heat treat process to give the load bearing part of the fastener Grade 5 specification performance (RC28-34), with a higher hardness for the drill point and lead-in thread (min. RC52) for drilling and tapping into steel. The lower hardness of the load bearing area increases the fastener's ductility helping to prevent hydrogen embrittlement.
#10-16 Flex5
Selectively hardened fastener with Grade 5 performance (RC28-34)Listed on Intertek Evaluation Report CCRR-0347
- Self-drill point #3
- Drill & tap capacity: 0.150"
- Diameter: #10 with 16 threads per inch
- Head: 5/16" AF hex washer head
- Available lengths: 3/4"
Intertek CCRR-0347 Report | PDF
#12-14 Flex5
Selectively hardened fastener with Grade 5 performance (RC28-34)Listed on Intertek Evaluation Report CCRR-0347
- Self-drill point #3
- Drill & tap capacity: 0.187"
- Diameter: #12 with 14 threads per inch
- Head: 5/16" AF hex washer head
- Available lengths: 7/8", 1", 1-1/2", 2"
Intertek CCRR-0347 Report | PDF
1/4-14 Flex5
Selectively hardened fastener with Grade 5 performance (RC28-34)Listed on Intertek Evaluation Report CCRR-0347
- Self-drill point #3
- Drill & tap capacity: 0.187"
- Diameter: 1/4" with 14 threads per inch
- Head: 3/8" AF hex washer head
- Available lengths: 1", 1-1/2", 2"
Intertek CCRR-0347 Report | PDF
1/4-20 Flex5
Selectively hardened fastener with Grade 5 performance (RC28-34)Listed on Intertek Evaluation Report CCRR-0347
- Self-drill point #4
- Drill & tap capacity: 0.312"
- Diameter: 1/4" with 20 threads per inch
- Head: 3/8" AF hex washer head
- Available lengths: 1-1/8", 1-1/2", 2", 2-1/2"
Intertek CCRR-0347 Report | PDF
Reach a sales representative at 1-800-234-4533 to learn more about the capabilities and specs of the Flex5 fasteners or conveniently place your order.
