#12 Woodgrip™ XG Metal to Wood Screw, Bond Seal, HWH | WGXG-12
Fastener Length [Inches]
1"
1-1/2"
2"
2-1/2"
Colored Fastener
No
Yes
#12 Woodgrip™ XG Metal to Wood Screw, Bond Seal, HWH
Drive Socket
1/4" Hex
Product Type
Wood screw
Diameter
#12
Diameter [mm]
5.4 mm
Drill Capacity Max [Inches]
24 ga.
Drill Capacity Range [mm]
0.6 mm
Drill Point
Sharp point
Head Style
Hex Washer head
Material
Carbon steel
Thread Major Dia
0.212"
Thread Major Dia [mm]
5.4 mm
Thread Minor Dia
0.130"
Thread Minor Dia [mm]
3.3 mm
Threads Per Inch
8
Washer
1/2" Galvanized bond seal
Metal panel to wood–extra grip performance in OSB, plywood and 1x4 pine
- Aggressive large threads provide grip into OSB, plywood and 1x4 fibers
- Tools; 0–2500 rpm screw gun equipped with depth sensing nose piece.
- Special care needs to be taken when installing into wood substrate less than 1" in thickness. Stripping or partially stripping the fastener out during installation compromises the clamp load and can affect the performance of the fastener.
- Use of impact guns or hammer drills is not recommended.
#12 Woodgrip™ XG Metal to Wood Screw, Bond Seal, HWH | WGXG-12
Fastener Length [Inches]
1"
1-1/2"
2"
2-1/2"
Colored Fastener
No
Yes
#12 Woodgrip™ XG Metal to Wood Screw, Bond Seal, HWH
Drive Socket
1/4" Hex
Product Type
Wood screw
Diameter
#12
Diameter [mm]
5.4 mm
Drill Capacity Max [Inches]
24 ga.
Drill Capacity Range [mm]
0.6 mm
Drill Point
Sharp point
Head Style
Hex Washer head
Material
Carbon steel
Thread Major Dia
0.212"
Thread Major Dia [mm]
5.4 mm
Thread Minor Dia
0.130"
Thread Minor Dia [mm]
3.3 mm
Threads Per Inch
8
Washer
1/2" Galvanized bond seal
Metal panel to wood–extra grip performance in OSB, plywood and 1x4 pine
- Aggressive large threads provide grip into OSB, plywood and 1x4 fibers
- Tools; 0–2500 rpm screw gun equipped with depth sensing nose piece.
- Special care needs to be taken when installing into wood substrate less than 1" in thickness. Stripping or partially stripping the fastener out during installation compromises the clamp load and can affect the performance of the fastener.
- Use of impact guns or hammer drills is not recommended.