#12 Impax™ Sealer SD3 Metal Self-Drill Screw, Cupped HWH | SD3-12-CHW5/16
Fastener Length [Inches]
1"
1-1/2"
1-1/4"
3/4"
Colored Fastener
No
Yes
#12 Impax™ Sealer SD3 Metal Self-Drill Screw, Cupped HWH
Drive Socket
5/16" Hex
Loading Bearing Length [Inches]
0.2257", 0.3487", 0.5987", 0.8487"
Loading Bearing Length [mm]
6, 9, 15, 22
Product Type
Self-drilling screw
Diameter
#12
Diameter [mm]
5.38 mm
Drill Capacity Max [Inches]
0.210"
Drill Capacity Range [mm]
0.889 mm–5.334 mm
Drill Point
SD3
Head Style
Cupped Hex Washer head
Material
Carbon steel
Thread Major Dia
0.212"
Thread Major Dia [mm]
5.38 mm
Thread Minor Dia
0.160"
Thread Minor Dia [mm]
4.06 mm
Threads Per Inch
14
Washer
Cut washer EPDM
Metal panel to light and medium gauge metal application
- Precision cold forged point assuring superior strength and the fastest drilling time performance
- Integral capped hex washer head with EPDM sealing washer
- Designed to have low driving and thread engagement torque and provide maximum clamp load
- Fasteners 1" and longer have special long pilot lengths to accommodate nested purlins
- VistaCoat® premium coating system
- VistaCoat® limited warranty
- Install fasteners with 0–2000 rpm screw gun equipped with depth sensing nose piece.
- Fastener length should provide for a minimum of 3/16" penetration of fully developed threads into metal substrate.
- Use of impact guns or hammer drills is not recommended.
#12 Impax™ Sealer SD3 Metal Self-Drill Screw, Cupped HWH | SD3-12-CHW5/16
Fastener Length [Inches]
1"
1-1/2"
1-1/4"
3/4"
Colored Fastener
No
Yes
#12 Impax™ Sealer SD3 Metal Self-Drill Screw, Cupped HWH
Drive Socket
5/16" Hex
Loading Bearing Length [Inches]
0.2257", 0.3487", 0.5987", 0.8487"
Loading Bearing Length [mm]
6, 9, 15, 22
Product Type
Self-drilling screw
Diameter
#12
Diameter [mm]
5.38 mm
Drill Capacity Max [Inches]
0.210"
Drill Capacity Range [mm]
0.889 mm–5.334 mm
Drill Point
SD3
Head Style
Cupped Hex Washer head
Material
Carbon steel
Thread Major Dia
0.212"
Thread Major Dia [mm]
5.38 mm
Thread Minor Dia
0.160"
Thread Minor Dia [mm]
4.06 mm
Threads Per Inch
14
Washer
Cut washer EPDM
Metal panel to light and medium gauge metal application
- Precision cold forged point assuring superior strength and the fastest drilling time performance
- Integral capped hex washer head with EPDM sealing washer
- Designed to have low driving and thread engagement torque and provide maximum clamp load
- Fasteners 1" and longer have special long pilot lengths to accommodate nested purlins
- VistaCoat® premium coating system
- VistaCoat® limited warranty
- Install fasteners with 0–2000 rpm screw gun equipped with depth sensing nose piece.
- Fastener length should provide for a minimum of 3/16" penetration of fully developed threads into metal substrate.
- Use of impact guns or hammer drills is not recommended.