#12 ZAC® SD3 Metal Self-Drill Screw, Zinc Alloy Capped HWH (5/16") | ZSD3-12-CHW5/16
#12–14 ZAC® Impax SD3 Metal to Metal Fastener (5/16")
Fastener Length [Inches]
Loading Bearing Length [Inches]
Color Code
US0001
US0012
US0014
US0020
US0023
US0042
US0051
US0074
US0091
US0102
US0109
US0110
US0228
US0232
US0248
US0302
US0324
US0330
US0348
US0393
US0416
US0422
US0507
US0537
US0548
US0576
US0578
US0691
US0798
US0843
US0850
US0890
US0925
US0928
US1116
Colored Fastener
Item No. 1364729
#12 ZAC® SD3 Metal Self-Drill Screw, Zinc Alloy Capped HWH (5/16") Zinc alloy cap head that will never red rust Precision cold forged assuring superior strength and the fastest drilling time performance Designed to have low driving and thread engagement torque and provide maximum clamp load
Read full description
Description
Description
#12 ZAC® SD3 Metal Self-Drill Screw, Zinc Alloy Capped HWH (5/16")
- Zinc alloy cap head that will never red rust
- Precision cold forged assuring superior strength and the fastest drilling time performance
- Designed to have low driving and thread engagement torque and provide maximum clamp load
- Special long pilot length to accommodate nested purlins
- Assembled EPDM sealing washer for a consistent weather tight seal
- Long life fastener limited warranty
Metal panel to light and medium gauge metal application
- Install fasteners with 0–2000 rpm screw gun equipped with depth sensing nose piece.
- Fastener length should provide for a minimum of 3/16" penetration of fully developed threads into metal substrate.
- Use of impact guns or hammer drills is not recommended.
5e5dd866-4619-4350-80c5-96110e3feb20
074e2100-83f5-4f61-858f-64e88d3c8ac3
c65e8824-2aaa-496d-a42b-67e87e4acac7
Product overview document
#12 ZAC SD3 (5/16" HWH) data sheet
Standard Colors
Specifications
Specifications
Drive Socket
5/16" Hex
Loading Bearing Length [Inches]
0.35"|0.60"|0.85"|1.35"
Loading Bearing Length [mm]
9|15|22|34
Product Type
Self-drilling screw
Diameter
#12
Diameter [mm]
5.38 mm
Drill Capacity Max [Inches]
0.210"
Drill Capacity Range [mm]
0.889 mm–5.334 mm
Drill Point
SD3
Head Cap
ZAC Zinc aluminum capped
Head Style
Cupped Hex Washer head
Material
Carbon steel
Thread Major Dia
0.212"
Thread Major Dia [mm]
5.38 mm
Thread Minor Dia
0.160"
Thread Minor Dia [mm]
4.06 mm
Threads Per Inch
14
Washer
EPDM sealing washer
Attachments
Attachments