#14 Type A Metal Self-tapping Screw, HH, 304 Stainless | TA-S3-14
#14 Type A 304SS Self-tapping Metal to Metal Fastener
Item No. 1203520
SFS delivers to commercial builders the ultimate #14 self-tapper. Zinc plating provides further protection against rust on top of the inherent corrosion resistance of ultra-strong 304 stainless steel. Plus, the #14 self-tapping screw’s hex head supports confident installation and can withstand high
Read full description
Description
Description
SFS delivers to commercial builders the ultimate #14 self-tapper. Zinc plating provides further protection against rust on top of the inherent corrosion resistance of ultra-strong 304 stainless steel. Plus, the #14 self-tapping screw’s hex head supports confident installation and can withstand high levels of torque.
- Zinc plated 304 stainless steel for corrosion resistance
- Available with no sealing washer or with stainless bond seal washer
- Long lengths available for specialty applications
Metal panel to light and medium gauge metal application for use in highly corrosive environments
- Install fasteners with 0–1000 rpm screw gun equipped with depth sensing nose piece.
- Use of impact guns or hammer drills is not recommended
- Metal thickness/drill bit size:
- 0.021"–0.026" (0.53 mm–0.66 mm); drill bit size 1/8" (3.18 mm)
- 0.027"–0.050" (0.69 mm–1.27 mm); drill bit size 3/16" (4.75 mm)
- 0.051"–0.075" (1.29 mm–1.9 mm); drill bit size #8 (5.05 mm)
- The hole size determines installation performance and pull out strength. Thickness is based on normal, single thickness purlin/girt or multiple material thickness combined for total.
- Fastener length should provide for a minimum of 3/16" penetration of fully developed threads into metal substrate.
0fdbbd7e-9e5a-4b86-9d71-cfabb56c19d2
b546578d-bd85-4977-a4e0-0d80485a4071
0e8da1f7-abf9-4f5d-8c03-429dd01b8f54
Product overview document
#14 Type A 304SS tapper data sheet
No Tool
Specifications
Specifications
Drive Socket
3/8" Hex
Product Type
Self-tapping screw
Diameter
#14
Diameter [mm]
6.38 mm
Drill Capacity Max [Inches]
0.075"
Drill Capacity Range [mm]
1.12 mm–1.91 mm
Drill Point
Type A
Head Style
Hex head
Material
304 Stainless steel
Thread Major Dia
0.251"
Thread Major Dia [mm]
6.38 mm
Thread Minor Dia
0.182"
Thread Minor Dia [mm]
4.62 mm
Threads Per Inch
10
Washer
19/32" Stainless bond seal|No washer
Attachments
Attachments
Video
Video