#14 Type A Metal Self-tapping Screw, HH | TA-14
#14 Type A Self-tapping Metal to Metal Fastener
Item No. 784181
SFS is here to equip you with the optimal screw for your specific metal attachment needs. We offer our popular #14 Type A self-tapping screw in lengths spanning from ¾” to 6”, available with or without washers. By using a screw made from zinc-plated carbon steel, you gain the assurance of reinforced
Read full description
Description
Description
SFS is here to equip you with the optimal screw for your specific metal attachment needs. We offer our popular #14 Type A self-tapping screw in lengths spanning from ¾” to 6”, available with or without washers. By using a screw made from zinc-plated carbon steel, you gain the assurance of reinforced corrosion resistance.
- Zinc plated carbon steel
- Available with no sealing washer or with bond seal washer
- Long lengths available for specialty applications
Metal panel to light and medium gauge metal application
- Install fasteners with 0–1000 rpm screw gun equipped with depth sensing nose piece.
- Use of impact guns or hammer drill is not recommended
- Metal thickness/drill bit size:
- 0.021"–0.026" (0.53 mm–0.66 mm); drill bit size 1/8" (3.18 mm)
- 0.027"–0.050" (0.69 mm–1.27 mm); drill bit size 3/16" (4.75 mm)
- 0.051"–0.075" (1.29 mm–1.9 mm); drill bit size #8 (5.05 mm)
- The hole size determine installations performance and pull out strength. Thickness is based on normal, single thickness purlin/girt or multiple material thickness combined for total.
- Fastener length should provide for a minimum of 3/16" penetration of fully developed threads into metal substrate.
8ee007d9-b140-4c4c-8a9b-63c69cdd930f
9b7923df-575a-46d7-bdfc-ddf19339dd14
707e1f31-eb55-4625-80d4-87ae7719efd7
Product overview document
#14 Type A tapper data sheet
No Tool
Specifications
Specifications
Drive Socket
3/8" Hex
Product Type
Self-tapping screw
Diameter
#14
Diameter [mm]
6.38 mm
Drill Capacity Max [Inches]
0.075"
Drill Capacity Range [mm]
1.12 mm–1.91 mm
Drill Point
Type A
Head Style
Hex head
Material
Carbon steel
Thread Major Dia
0.251"
Thread Major Dia [mm]
6.38 mm
Thread Minor Dia
0.182"
Thread Minor Dia [mm]
4.62 mm
Threads Per Inch
10
Washer
19/32" Galvanized bond seal
Attachments
Attachments
Video
Video