#10 Woodgrip™ HiLo Exterior Sidewall Screw, Pan head | WGLPMP-10
Fastener Length [Inches]
1"
1-1/2"
Colored Fastener
No
Yes
#10 Woodgrip™ HiLo Exterior Sidewall Screw, Pan head
Drive Socket
T25
Product Type
Wood screw
Diameter
#10
Diameter [mm]
4.95 mm
Drill Capacity Max [Inches]
24 ga.
Drill Capacity Range [mm]
0.6 mm
Drill Point
Type 17 milled point
Head Diameter
1/2" (12.7 mm)
Head Style
Pan head
Material
Carbon steel
Thread Major Dia
0.195"
Thread Major Dia [mm]
4.95 mm
Thread Minor Dia
0.130"
Thread Minor Dia [mm]
3.3 mm
Threads Per Inch
15
Washer
1/2" Galvanized bond seal
Metal panel to wood exterior sidewall applications
- Low profile head for improved aestetics
- Type 17 milled point for fast installation
- Drive stability with T25 drive
- Assembled bond seal washer
- Install fasteners with 0–2500 rpm screw gun equipped with depth sensing nose piece.
- Special care needs to be taken when installing into wood substrate less than 1" in thickness. Stripping or partially stripping the fastener out during installation compromises the clamp load and can affect the performance of the fastener.
- Use of impact guns or hammer drills is not recommended.
#10 Woodgrip™ HiLo Exterior Sidewall Screw, Pan head | WGLPMP-10
Fastener Length [Inches]
1"
1-1/2"
Colored Fastener
No
Yes
#10 Woodgrip™ HiLo Exterior Sidewall Screw, Pan head
Drive Socket
T25
Product Type
Wood screw
Diameter
#10
Diameter [mm]
4.95 mm
Drill Capacity Max [Inches]
24 ga.
Drill Capacity Range [mm]
0.6 mm
Drill Point
Type 17 milled point
Head Diameter
1/2" (12.7 mm)
Head Style
Pan head
Material
Carbon steel
Thread Major Dia
0.195"
Thread Major Dia [mm]
4.95 mm
Thread Minor Dia
0.130"
Thread Minor Dia [mm]
3.3 mm
Threads Per Inch
15
Washer
1/2" Galvanized bond seal
Metal panel to wood exterior sidewall applications
- Low profile head for improved aestetics
- Type 17 milled point for fast installation
- Drive stability with T25 drive
- Assembled bond seal washer
- Install fasteners with 0–2500 rpm screw gun equipped with depth sensing nose piece.
- Special care needs to be taken when installing into wood substrate less than 1" in thickness. Stripping or partially stripping the fastener out during installation compromises the clamp load and can affect the performance of the fastener.
- Use of impact guns or hammer drills is not recommended.