DG Drill Gauge with 5.1mm diameter drill
Item No. 1321704
The DG Drill Gauge comes equipped with a 5.1mm diameter drill that works for 5mm diameter facade rivets (AP16 or SSO-D15) Four different nosepiece (front housing) diameters (7, 8, 9 or 10mm) are available to fit various pre-drill diamter of the facade panel float hole. Interchangeable nose
Read full description
Description
Description
The DG Drill Gauge comes equipped with a 5.1mm diameter drill that works for 5mm diameter facade rivets (AP16 or SSO-D15)
Four different nosepiece (front housing) diameters (7, 8, 9 or 10mm) are available to fit various pre-drill diamter of the facade panel float hole.
- Interchangeable nose pieces for various hole sizes
- Single handed operation
- Includes a 5.1mm (.201") drill bit (equals #7) for AP16 and SSO-D15 rivets
- Can be used with any screw driver with drill chuck
Creates centered 5.1mm diameter drill holes to install AP16 or SSO-D15 facade rivets
When installing AP16 or SSO-D15 rivets, using the DG Drill Gauge allows you to pre-drill the substructure perfectly centered to the hole of the cladding panel
a182b554-5320-47c0-af50-dacb66281bc4
34e20e8a-374c-4f0c-98c5-441eca63b926
3ad41855-360f-42d1-97b9-b27f1edfcc20
fcf65844-dd7e-4101-8f4d-1df7bcc24bb8
0ac79d57-3ca6-4f60-94de-1fb395bff38c
Product Sheet DG
Product Sheet
No Tool
Specifications
Specifications
Packing Qty
1
Pre-Drill Diameter [mm]
7.0|8.0|9.0|10.0
Product Type
Drilling gauge